Electronic connector PIN fixing method:
There are many pins on the connector (also known as: PIN pin), the main function of the connector pin is to interconnect with related equipment, so the pin of the connector is very important, in order to keep the pin strong and stable, what methods should be used?
1. Connector pin PIN pin: Forced press-in method to fix the pin:
1. The pin installation is simple, the insulated wire does not need to be stripped, and the electrical connection is good without damaging the wire;
2. There is no need for cable return, saving investment in cables;
3. There is no need to cut off the main cable, and the cable can be used as a tap point at any position;
4. Low cost and small installation space requirements;
5. The joint is insulated, and the cable branch box can be made without stripping the insulating skin of the cable.
2. Connector pin pin epoxy type: after the insulator and shell are punched, use epoxy resin to fix the pins:
1. Strong chemical corrosion resistance, acid resistance, alkali resistance and organic solvent resistance;
2. Low molding shrinkage, good dimensional stability, and low cracking probability;
3. Excellent mechanical properties and heat resistance;
4. High bonding strength, especially suitable for molded case packaging of products with inserts, coils and electronic devices;
5. Excellent electrical properties, can be used as high-frequency and high-voltage insulating materials, arc resistance and surface leakage resistance are stronger than general insulating materials.
3. Connector pin pin point riveting type: after pressing, the point riveting shell fixes the pin:
1. Simple structure, high reliability, and cost-effective method of permanent fixed assembly;
2. The assembled metal components are firm, tight and stable, with high impact resistance, corrosion resistance, shock resistance and strong weather resistance.
