Generally speaking, there are three processing processes for connector PIN pins: lathe processing, electroplating and assembly, so let's take a look at it specifically:
1. Lathe processing.
Lathe processing is the step of pin needle processing, mainly processed by Japan centering automatic lathe, and the surface finish of lathe processing is also very critical.
2. Plating
The lathe is then electroplated, and the thickness of the plating has a huge impact on the cost structure.
3. Assemble
Assembly is generally the last link of processing the PIN pin, this step needs to assemble the processed PIN pin parts, and then the connector PIN pin is made.
Don't underestimate a small pin pin in the connector, as a key component of the normal use of the connector, if there is no complete processing technology and strict quality control, it is likely to lead to problems in the process of use of the electronic connector, so every process in the process of connector pin processing must be operated in strict accordance with the requirements. The knowledge of connector pin processing technology Jinchuan Electronics' technology is introduced to you here, I hope that through our explanation, you have a basic concept of "connector pin processing technology".
Yueqing Jinchuan Electronics has been established for more than 20 years, the technology has been constantly upgraded, the production experience is rich, can prevent most of the connector pin production process prone to problems, but also can quickly solve the various problems that have arisen. In order to pursue high quality, the products are strictly tested before leaving the factory, and have passed the ISO9001 and TS16949 certification. If you have any purchase needs or other questions about connector pins, you are welcome to call us, our phone number is: 13736390333 or 13925787878.
